SuperAbrasive Techniques Ltd.


Copyright © 2009 SAT SuperAbrasive Techniques Ltd

Diamond, CBN, PCD and PCBN for all industries.


Superabrasive Techniques Ltd has a range of  PCD products suitable for machining operations for a broad range of  non-ferrous work piece materials.

PCD ( Polycrystalline Diamond) is manufactured by sintering micron size diamond particles ( typically 10 micron ) to form a solid large intergrown mass of diamond suitable for cutting tool elements , wire drawing dies and wear part surfaces. It is normally bonded to a tungsten carbide substrate to enable manufacturers to bond the PCD to tool holding systems.

1. Cut pieces - standard and special shapes

2. Rounds up to 75mm diameter


3. Grades available from nano to 40 micron

4. Overall Thickness from 1.0 to 8.0mm

5. Diamond layer from 0.3mm to 1.5mm

Return to Product list